Bearing off
Bearing off is the final race from your home board into the tray. The goal is to remove all fifteen checkers, but you cannot begin while even one of your remaining checkers is outside your home board or on the bar.
Ivory · you · 13 off
Obsidian · opponent · 0 offNumbers are from Ivory’s perspective. On small screens, scroll the board sideways or focus it and use the arrow keys.
Get every remaining checker home
Your home board is points 1–6 in your own numbering. Checkers already borne off stay off and do not need to be counted as “at home.” When all checkers still in play are in that six-point area, bearing off becomes legal. A checker on point 7 is enough to prevent it.
A turn can bring your last outside checker home with one die and bear off a checker with the other. For example, with 2–1 and one outside checker on point 7, playing 7/5 with the 2 can make a subsequent 1/off legal if you have a checker on point 1. Required dice usage still applies.
Exact rolls remove a checker
A die matching an occupied point can remove one checker from that point: a 4 can play 4/off. You can also use a die for a legal move inside the board instead of bearing off, provided your full turn satisfies the dice rules. Bearing off an available checker is not automatically compulsory if another legal full play exists.
When the roll is too large
You may use an oversized die to remove a checker only from your highest occupied point, and only when no checker remains on a higher point. If your highest checker is on point 4, a 5 or 6 may remove it. You may not use that 6 to remove a checker from point 2 while one remains on 4.
Now suppose you roll 4 while you still have a checker on 6 and none on 4. You cannot bear off from 3 or 2 with that die. A move such as 6/2 may be required instead. Reassess after each move: the highest occupied point can change during a turn.
Getting hit stops bearing off
If an opponent hits one of your checkers during this phase, you must enter it from the bar and bring it all the way home before bearing off again. Checkers already removed remain safe in the tray. The interruption is why leaving a blot against an opponent still in your home board can be expensive.
Work through the last two checkers
Imagine your final checkers are on points 4 and 2 with a 6–2 roll. Use the 6 to remove from 4, then the 2 to remove from 2. If only one checker remains on 2 with that same roll, both dice could remove it separately, so the higher-die rule requires the 6. Next, learn how the final position determines the result.
